Ben-gee's latest activity
-
BBen-gee replied to the thread Bath overflow pipe.An inexpensive McAlpine Bath waste/overflow is available in ToolStn for £5.65 complete - this is probably the best way to go.
-
BBen-gee replied to the thread Water Supply from Washing Machine Feed.No, full bore is fine. Did you use the correct insert in the plastic pipe?
-
BBen-gee replied to the thread sink waste.Just because someone sells a ‘thing’ , doesn’t mean it’ll solve the problem! They do differ between manufacturers; some are...
-
BBen-gee replied to the thread Toilet flush pressure question.It’s the ideal standard one with a massive white plastic disc under the button.
-
BBen-gee replied to the thread Repairing a dripping tap - what’s next?.You got it, the next thing is to unscrew the slim brass retaining nut. Tool in ease of use/least likely to damage anything: a socket on...
-
BBen-gee replied to the thread Repairing a dripping tap - what’s next?.Well it’s not very clear, but I think that chrome shroud needs to come off - and the fact that it’s threaded on the inside (good spot...
-
BBen-gee replied to the thread Repairing a dripping tap - what’s next?.No, not sure! A Bird’s eye view photo would help, to see how you might unscrew the brass nut without removing the dhroud. Does the...
-
BBen-gee replied to the thread How to tighten 15mm Flexible Tap Hose Adaptor.If you’re struggling, tighten the adaptor into the isolator and then tighten the hose onto the adaptor - don’t worry if it twists a...
-
BBen-gee replied to the thread Toilet keeps blocking.Yes lots of people use a flexible pan connector, I just told you how I would do it - but it’s not the only way! As to venting the drain...
-
BBen-gee replied to the thread Toilet keeps blocking.However, the gurgling/blocking suggest there is another problem too. This is either a blockage further down the line (lift manhole...
-
BBen-gee replied to the thread Toilet keeps blocking.Replace that pan connector. You need to measure from the spigot on the pan to the back of the pan (ie the wall when the pan is in...
-
BBen-gee replied to the thread Repairing a dripping tap - what’s next?.First you need to remove the chrome shroud- it either pulls off, or unscrews. The follow what Shaun said.
-
BBen-gee replied to the thread Floating Countertop Experiment.The bigger holes won’t break through if you keep the current hole edge as your edge, ie re-drill with a different centre point...
-
BBen-gee replied to the thread Water Supply from Washing Machine Feed.I would try the gate valve from cold water storage to hot water cylinder. If it shuts off you are all set to change the wash/mac to an...
-
BBen-gee replied to the thread Can this Boiler Flue be reduced in size?.Looks like they used a 1m flue length whole as they just couldn’t be bothered to cut it- bit lazy.
Newest Plumbing Threads
-
-
-
AUS How to stop the newsletter style emails?
- Started by Seregwethrin
- Replies: 1
-
How can I check if my pressure pump is working ?
- Started by Jackrawlings
- Replies: 2
-
-
-