Why won’t my LED chandelier illuminate properly?{/b}
Any advice would be greatly appreciated.
After about two years, a LED ring (20” in diameter) chandelier in our dining room started flickering. A week later, the flickering stopped but the ring would barely glow. An electrician was called and he replaced the driver however, the LED ring still barely glows when turned on. I was told the chandelier needs to be replaced. Upon inspecting the replacement driver the electrician used, the output amps matches the original (900ma) however, the DC range on the replacement driver was a few volts lower than the original: 24-48V is the original vs. 18-39V on the replacement. My wife loves this light so seeking a second opinion before replacing the light altogether.
Thanks in advance for your thoughts!
Click Why won’t my LED chandelier illuminate properly? to continue reading this thread.
This content has been posted from our Electrical Advice website. You're welcome to reply to the question or post your own question, whether DIY or professional.
Any advice would be greatly appreciated.
After about two years, a LED ring (20” in diameter) chandelier in our dining room started flickering. A week later, the flickering stopped but the ring would barely glow. An electrician was called and he replaced the driver however, the LED ring still barely glows when turned on. I was told the chandelier needs to be replaced. Upon inspecting the replacement driver the electrician used, the output amps matches the original (900ma) however, the DC range on the replacement driver was a few volts lower than the original: 24-48V is the original vs. 18-39V on the replacement. My wife loves this light so seeking a second opinion before replacing the light altogether.
Thanks in advance for your thoughts!
Click Why won’t my LED chandelier illuminate properly? to continue reading this thread.
This content has been posted from our Electrical Advice website. You're welcome to reply to the question or post your own question, whether DIY or professional.
