I have a dripping hot water bath tap. I have removed the top but underneath is a plastic cap ( see picture) but the cap will not come off to get to the cartridge, and I don't want to force it in case it breaks.
Anybody any ideas on how to remove it, and if it breaks where you would be able to...
Desperate. Can anyone help me identify this bath mixer tap? Make worn off and needs replacement cartridge. External diameter is 46mm and height is 114mm
Just replaced taps on bath so kids can get a shower in bath as well ,worked fine to started with then water wasn't hot so took them back and exchanged them ,now these are doing same any ideas anybody ?
Hi everyone. We have installed a new shower kit (over the bath). Not touched the bath mixer taps (thermostatic mixer) other than to replace the old hose with a new hose. Ever since, we have not had hot water in the bath taps. Not even warm, just freezing cold. Is this going to be an expensive fix?
thenameisblonde
Thread
bathbathtaps
hot
hot water
no hot water
taps
water
Hello. I’m a newbie here, so I apologise in advance if, despite my good intentions, I breach any rules or etiquette.
I’m replacing a monobloc bath shower mixer tap (Ideal Standard - I.S.). Now I’ve got the old tap out, I discover that the cutout in the bath is about 51mm dia. Unfortunately, the...
Hi, recently moved into new house, (the house is four years old), the bath has very low hot water temperature, I'm assuming its an anti scald device?
The hot water in the rest of the house is fine, eg kitchen sink, utility sink, bathroom wash hand basins, etc, they all get nice and hot, its just...
Hi there! our Heritage bath taps (see attached image) have a leak from the shower lever when diverted to the shower head.
Unfortunately this model is over 15 years old and spare parts are no longer available. As a very amateur DIY-er I am not familiar with the inner workings of these sort of...
I'm struggling to remove or even find where to remove the cap off these taps.
I've tried prising it off twisting and multiple things to remove the cap to get inside. I'm out of ideas....
Hi there. New diy member here. I am refreshing my bathroom and the taps are currently fed cold mains and gravity hot from the loft. There only seems to be a very small cold water tank in the loft.
I am looking at putting a bath filler mixer tap on the bath but concerned about the unbalanced...
We have just upgraded the bathroom and all is well except for one issue the bath tap makes a whistling noise on both the hot and cold feed.
if we turn the sink tap on the noise will go.
Its a brand new tap it also has a diverter valve for a shower which when opened stops the noise.
Anyone had...
I am changing over my old taps to new. The supply has 15mm to cold, 22mm to hot.
I am need to fit an isolation valve to the 15 and 22mm pipe..
I want to know how i connect the 22mm isolation to the 15mm tail on the hot tap.
I dont want to use solder if it can be helped.
Advice please...
I want to change this tap:
To something like this Bath Shower Mixer - Wave Range - Better Bathrooms - https://www.betterbathrooms.com/p/wave-bath-shower-mixer
Is this possible and what kind of cost would I be looking at for a central London plumber to do the work?
A new set of taps they said yes I said booked in at 4pm lol. Just before I start to smash my hands to bits with getting them out what's with these tap connectors do they screw off if so do they need fibre washers when I eventually get them off
Thanks
Hello all,
I'm new to the forum and have joined as I've recently experienced an issue.
In short, our traditional boiler packed up, so we decided to replace this with a combi boiler. A company came in looked at our system and gave us a quote, which we went with.
The work took a couple of days...
I have a floor mounted Hudson Reed bath tap to fit for a freestanding bath. This is the first one I have ever fitted and have no idea how you can ever fit them. I have two 15mm hot and cold pipes sticking out the floor, they then have to go up a 800mm tube which screws to a base plate on the...
Hi,
I'm installing new combi taps on my bath
Swirl Period Deck-Mounted Lever Bath/Shower Mixer Tap | Bath Taps | NoLinkingToThis
Would this flexi hose be suitable - the inlet pipe is 21mm
Flexible Hose with Valve 22mm x ¾
cheers
Brendan
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.