My mate has a Heatslave that is locking out on the burner, it doesn’t seem to lock out on heating mode just hw, though (and this may be normal ) when it has locked out on hw it cannot be reset through heating mode, that is the lock out light is not illuminated on heating, hot water has to be...
cheap-leaks
Thread
burner
heating
heatslave
lockout
seems
until
water
Anyone any ideas? Never had bad luck like this!
At a boiler with a Bentone B11 burner that would constantly lock out after about 2hours on.
Firstly, this burner is only 3 year old & in brand new condition to look at. I have checked nearly everything including the oil getting to burner, the...
Had 2 interesting jobs this week on Heatslaves.
Firstly, fuse kept blowing (3.15A fast blows - always keep some in the van). Worked it down to the coil. This is the second Heatslave this month with the same diagnosis, anyone else had that?
Second job of interest was another HS with a leaking...
Bunker
Thread
burner
control
electrical
issues
sleeve
switch
water
Hi there,
I have a Worcester Greenstar Camray 12/18 Utility. I've run out of oil over night and got an oil delivery today. When pressing the red reset button, it sounded as if the boiler would come on again, but cut out after a few seconds. (I pressed the button 4 times, I hope that's not too...
Ive seen the "burner kit" consisting of super fire 2, bottle, 15 cutters, matt and bag adverised loads recently. I dont want the whole kit just the bag but no merchant will sell me one :bomb: Anyone know where to get one or what does everyone else use for just their whooshing gear?
I have been approached by a Dental Lab that would like a permanent gas supply for their Bunson burner. Not really clear on what the regulations etc are for this is it something I am allowed to do? It's a domestic size installation with just a combi boiler supplying the Lab and Dentist currently...
Bentone Inter B9-B oil burner assembly removed from recently decommissioned Worcester Danesmoor 15/19 oil boiler.All in good working order as far as I'm aware. Customer had it serviced about 5 months ago. Manufactured 1999.
Buyer collects, or could deliver within 10 mile radius of East...
It is brand new installation, CH burner on the 2nd floor, 6 radiators on the 2nd floor, 6 radiators on the 1st floor > everything worked more than fine. CH burner is of very high capacity and can provide heating to 20 such radiators.
Then I just wanted one additional radiator on the ground...
hi - i have a faulty Riello 40 G2S burner - i think it ran out of oil but after a refill it still wouln't fire - runs for about 20 sec then locks out.
oil is getting to the pump ok but not to the nozzle or are damper valve - i think it might be the pump solenod vaive not being activated by...
Hi has anyone fitted one of these , need to know whether it can be fitted on a 12mm tile contruction hearth, had ma Heta's only a month and first one ive done since passing, or the manuals would be even better? Thanks guys
Hi,
I'm not a heating engineer and I have no intention of touching our boiler, but I really could do with some friendly advice regarding a weird fault.
The boiler is an 8-year old ThermeconS90/120. Burner is an Ecoflam Minor 4. Nozzle is a 1.10/60 Location is a dry outhouse.
When cold...
hi there just done my hetas and am pricing up a job so any help would be allowed, am I allowed to use a suspended cowl to attach my liner to at the chimney pot or do I have to use a plate and clamp? the suspened cowl will save a lot of time and effort, also what's the difference between a...
Cant find the answer to this anywhere, can anybody help
Pal of mine just bought a new house a few weeks ago. It has a logburner already fitted, but since moving in he has seen a old capped off gas pipe underneath it. (50 mm away).
We are assuming its 'live'.I obviously want to remove it...
I am currently a plumber in the process of becoming gas safe an have a questions.
Why can't you test the working pressure on new boilers?
Thanks for your time an help
Huckerz
Thread
appliance
burner
gas
meter
pressure
question
working
Evening lads,
Just bought a house and knocking it to bits, i want to fit a log burner/multi fuel burner within the next few months. Don't no anyone so if anyone is local and wants to PM me feel free. Will give more details and my plan once spoke to someone.
cheers
Hi
I have recently been working on an ecoflam burner which heats the cooker part of an Alpha range cooker.
The cooker fires up and gets to temperature and goes through the cycle of firing up to maintain the heat but on occasions when it tries to fire up it locks out.
The filter is clean and...
KevB
Thread
burner
check
color
ecoflam
fault
intermittent
oil
verdana
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.