Looking for any ideas to help.
I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine).
A week ago I reset the air gap as I was having dripping from the pressure relief valve. Since then I've lost a lot of pressure from the hot water feed to my shower. The rest of...
Low hot water pressure
Hi everyone, I'm hoping someone is able to shed some light on my situation before I have to call out the professionals.
We've been in our house for over 3 years now, when we moved in the hot water pressure was pretty good (confirmed by a retired plumber family friend)...
Hi everyone, we have low hot water pressure in the entire house. It doesn’t appear to be a problem with the boiler. A Heatslave 25/32 External. The central heating works. The hot water runs for a moment before shutting off. Should I be clearing residue or air somewhere? Thank you, Abram
We have low hot water pressure in the entire house. Boiler is a Heatslave External 25/32, fuel in kerosene. The central heating is still working. Water initially heats up but soon flow ceases. The gauge pressure is correct. Do I need to release air or residue somewhere? Thank you.
Hi, I have a hot water cylinder which feeds 3 outlets (kitchen sink, basin in bathroom & bathtap) which has never had very good pressure (probably because of the set-up) but last year got so feeble that a guy suggested fitting a pump alongside the cylinder. This can work fine but then all of a...
Hello, looking for advice on this please, general direction of where to look. We have an unvented Megaflo and the pressure and temperature is perfect in every other shower and tap except this one. Think it's a Mira Select BIV but the name has rubbed off. Any pointers as to where I should start...
Hello, I'd love some advice on my system, I've had a couple of plumbers come in that seemed to specialise in gas systems and seemed perplexed by my all-electric systems and the issues I'm having. My system is all electric heating and hot water system, in a flat on the 4th floor. The mains...
Good morning everyone. My parent had a new kitchen and bathroom fitted in her flat 2 years ago and has only now told me that the hot water flow to both hot taps is really poor. it wasn't like this before. its a flat with a 1075x450 IND BS combi HW tank. she says that the tank was drained down...
Hi
We have recently had a 35kw combi boiler installed in a 4 bed 2 bathroom property.
Since the combi boiler was installed we are getting slow hot water pressure affected shower and bath I wouldn’t say it is trickling but it is not a good pressure where you feel clean. The bath takes longer...
I've had a new Firebird combi oil boiler fitted and the hot water pressure is low( in fact it's terrible)..the cold water pressure is good and I can't find any leaks and loose no pressure. Please help. Thanks alot
ON MONDAY THIS WEEK 14/02/22 MY IMMERSION HEATER WAS REPLACED,BUT SINCE THEN MY HOT WATER PRESSURE IS VIRTUALLY NON EXSISTANT.
I CONTACTED THE PLUMBER TO COME BACK ONLY TO FIND OUT HE WAS AT THE AIRPORT WAITING FOR HIS HOLIDAY FLIGHT {JUST MY LUCK} ANY IDEA WHAT COULD HAVE HAPPENED,I CAN'T...
Hi.
We’ve a pressurized megaflow system and the last few weeks we’ve lost water pressure on Just two outlets in the house. The first a Keuco mixer shower were the hot outlets is just a dribble where previously it filled the bath in 5 mins and the second a Quooker tap where the tank fed supply...
Hi,
My bathroom is getting redone in a few weeks. I have the option of 2 taps again or a mixer. I've seen online that if the hot flow is 'too much' lower than the cold, a mixertap won't work well.
How do I know if it might be an issue? (Or what the cause of difference is?) (I can't say for sure...
Fletch666
Thread
america
bathroom
hotwaterpressure
mixer
mixer tap
sink
tap
usa
I have I have an Ideal C35 boiler. We have really low water pressure from all the hot taps (should be getting 15 litres per min if using more then one stood completely).
On Friday Ideal came out and changed the diverter valve, heat exchange and motor but it has made no difference.
The cold...
We've recently just moved into our recently renovated home and we've found out that we've got some interesting plumbing issues, the first one is that both the upstairs and downstairs toilets are hot (the cistern water is hot) and radiating through the toilet and wall (concealed cistern), and the...
Hello. We have a system boiler in the kitchen filling what appears to be a two stage storage tank on the landing (under boiler pressure). There is no additional storage in the attic. Hot water from the shower bar is fine but all other hot taps are low pressure. Cold water pressure appears fine...
Hi there,
I am facing an issue with very low hot water pressure in my upstairs shower. I have unvented hot water cylinder on the same floor and another shower as well. The hot water pressure is good in the other shower as well as in the bath mixer tap.
I have a GROHE 1000 mixer shower and i...
Hi everyone,
I've got a strange one. My boiler (intec 34c combi) has good pressure (high end of green).
When I open a hot water tap, the boiler fires up fine but it's just a trickle that comes out the tap. The water does get really hot though. My boiler is placed over an alpha flowsmart 50...
Hi, just installed Salamander pump and s valve to boost hot water, everything works great, all mixer taps work fine, the one problem I have is the shower head on the bath taps is very hot and I can't seem to be able to adjust it. Taps are fine it's just the shower head, have tried turning...
Hi,
I have today removed our bath ready to put a new one in and have capped both the hot and cold feeds off.
However, when putting both the hot water (turned off as cold feed on to the cyclinder) and cold water back on (turned off at both the stop tap under the sink and the cold feed in the...