Currently reading:
2 zone htg plus hw wireless programmer.

Discuss 2 zone htg plus hw wireless programmer. in the Plumbing Zone area at PlumbersForums.net

Status
Not open for further replies.
Messages
578
Always had honeywell in the past has anybody improved on them or should I stick with whom I know. I would ideally like one unit to control 2 heating zones and the hw.
 
Last edited:
There not as good as they once were

Me personally I use Drayton port valves
 
Am I asking a bit much in wanting 3 channels/zones contolled wirelessly?

No not at all. There are many options available.
I skim read the thread to be honest. If you want wireless, that's fine.

As far as Honeywell are concerned, I do like them, I do not think they are as good as they used to be. One thing I do not like about their wireless programmer is the wiring in the sender unit is fiddly and small. (my opinion).
 
Horstmann do a three and a four channel programmer. Not my fave though. Called Channel Plus XL.
 
Use wireless Danfoss hot water RET- B with programmer and Rx2 and TP range of wireless programmable thermostat fo CH
 
Me thinks I have not imparted enough info to you guys. In my setup the HW tank and the pump and the current hard wired programmer all reside in the 1st floor landing airing cupboard. What I ideally want is the programmer downstairs. Hard wiring it is not really on, 16c property and the less hacking about of walls I do the better, hence looking for wireless. Most though just seem to offer wireless from a stat of some sort to the programmer which is not what I need. I need basically a programmer which can connect wirelessly with a slave unit positioned in the airing cupboard.
 
Honeywell evo home
 
Status
Not open for further replies.

Reply to 2 zone htg plus hw wireless programmer. in the Plumbing Zone area at PlumbersForums.net

Back
Top