Hi, I'm hoping someone here may be able to help me out with an issue I have with my baxi duotec boiler. Basically, the hot water temperature has been fluctuating quite alot, dropping in temp then raising again whilst showering. I have had an engineer out who has changed the thermistor, but I am...
Hiya fellow gas engineer.
Need some help on this boiler fault.
Went out to this E133 Error on a Potterton Titanium 24 (GC: 47-393-39)
I checked the inlet standing pressure which was at 25mb. Boiler attempts to fire and the pressure drops by 1mb but the gas valve doesn't open. Checked the black...
I need some help and advice with a boiler issue. We have F29 and then F29 appearing on our new boiler. This happened after few days where water was dripping from the condensation pipe. Our regular gas engineer(who installed the boiler) was not available and will be in a couple of days. The...
Ideal Logic Heat 15 System Boiler
Hi. Just started to get an F3 Fan Fault on this boiler. On power up there seems to be a quiet thump from somewhere then it goes through the start up sequence. It spends a few seconds on the ‘c’ display before coming up with the F3 error code. Can anyone advise...
I have a 24kw combi Daikin boiler and it keeps sending up an error which according to the manual indicates the "pilot is out" any ideas? it often just comes back on, but it is happening relatively regularly
Hi Guys,
I have installed a boiler "Baxi Platinum+ 40Kw Combi" on the outer wall in the loft.
It works fine for 1 or 2 days and then it gives E1 33 error randomly. It is connected to the Hive Thermostat too.
I have checked all the common reasons for getting this error but in no way could...
Good afternoon Guy's & Girl's,
So I have a Baxi 630i that is showing a e133 fault. Upon hours of extensive research it is an ignition fault that can be caused by numerous of issues.
One being that the condensate pipe is frozen, given the current weather and climate I edged my bets on this...
Hi
I have been ringing round trying to have someone call out but it appears all heating engineers are booked up until after xmas so trying to find a solution if possible, any advice is much appreciated.
We have an external Calor 1000litre gas tank in the garden and a Potterton boiler, we let...
I'm getting an e119 error which I assume is low water pressure. I'm turning the 2 valves that I think should increase pressure but I'm not getting anything. Any ideas?
I have a valliant boiler and for 1 momtj it hasnt been working and has been displaying a con error on the boiler. An engineer bought a new PCB but its still showing this error and i think they may be scamming me. I opened the boiler cover after they left and i can see an unconnected wire
Please...
Hi all,
Really hoping somone can shed some light on this. I have an Ideal Logic Heat 15 boiler with an FD error. However, the boiler doesn't have a pressure guage or pressure release valve, so I am unable to check the water pressure. I assume this model doesnt work in that way? I have water...
Hi
I've come back from a two week holiday to find my Baxi boiler displaying an error. It's a Baxi Ecoblue Advance 19 Heat ERP and the error is a red light flashing 6 times. This seems to mean "Miscellaneous" in terms of error codes. A reset is doing nothing.
I've had a plumber out who's...
I bought a ashp 3 years ago and now it shows ee01.
After a power cycle there is no error message and both compressors work for some hours, at some stage one (first) compressor does not restart but the other compressor runs as normal showing ee01.
Its a dream 22kw 2 fan system.
Can anybody help...
Hi,
Ravenheat CS80 boiler giving error 10e and 02e which indicate high pressure.
But pressure is fine.
What else to check please?
Many Thanks in advance.
A couple of weeks ago my Valiant Ecotech Plus 637 displayed Error F76. Boiler is 13 years old; serviced annually.
I power cycled the boiler and it operated for ~10 days before hitting the same error again; I once again power cycled the boiler and it was in operation for ~24 hours before...
Hi
Two weeks ago I turned the hot water tap on and heard a clanging noise like a wheelie bin being dragged, the water went cold and boiler in the loft flashing 2. I turned it off and on again and it worked ok. Until a week later did the same thing again - I turned it off and on again it took...
My baxi boiler keeps showing error code E133 we reset it and it comes back on; this only seems to happen late afternoon early evening, it can happen a few times in one evening then not again for a few days later sometimes a week later, I’ve been told it’s low gas pressure but when I googled it I...
Hello All
My Baxi Duo Tec Combi HE error display light is not 'lit up' - it appears to be blank. My boiler hasn't worked since the weekend so I checked the boiler panel expecting to see an error E119 low pressure message which I can normally fix myself. The error message display panel appears to...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.