forum

Kia Forum (formerly the Forum) is a multi-purpose indoor arena in Inglewood, California, United States, adjacent to Los Angeles. Located on West Manchester Boulevard, with Pincay Drive to the south and between Kareem Court and Prairie Avenue to the east and west, it is north of SoFi Stadium and the Hollywood Park Casino, and about 3 miles (4.8 km) east of the Los Angeles International Airport (LAX).
The Forum opened on December 30, 1967. Architect Charles Luckman's vision was realized by engineers Carl Johnson and Svend Nielsen. It was a groundbreaking structure without extensive internal support pillars that was unique in an indoor arena the size of the Forum.From 1967 to 1999, the Forum was home to the Los Angeles Lakers of the National Basketball Association (NBA) and the Los Angeles Kings of the National Hockey League (NHL) before both teams joined the NBA's Los Angeles Clippers at the Staples Center (now Crypto.com Arena). From 1997 to 2001, the Forum was also the home of the WNBA's Los Angeles Sparks until they moved to Crypto.com Arena as well.
Alongside Madison Square Garden in New York City, the Forum was once one of the best-known indoor sports venues in the U.S., largely due to the Lakers' success and the Hollywood celebrities often seen there. It was the site of the 1972 and 1983 NBA All-Star Games, the 1981 NHL All-Star Game, 1984 Olympic basketball, and the Big West Conference (from 1983 to 1988) and 1989 Pacific-10 Conference men's basketball tournaments. The venue also hosted tennis and boxing matches, as well as major music concerts and political events.
In 2000, the Forum was acquired by the Faithful Central Bible Church, which used it for occasional church services and leased it for sporting events, concerts, and other events. In 2012, the Forum was purchased by the Madison Square Garden Company (MSG), for $23.5 million; MSG announced plans to renovate the arena as a world-class concert venue. On September 24, 2014, the Forum was listed on the National Register of Historic Places. On March 24, 2020, Los Angeles Clippers owner Steve Ballmer purchased The Forum from MSG for $400 million.
The Forum has previously been known as the Great Western Forum, and was nicknamed "the Fabulous Forum" by long-time Lakers play-by-play announcer Chick Hearn. It is also known informally as the LA Forum to distinguish it from other places with the name "Forum".

View More On Wikipedia.org
  1. J

    Zoned heating with Terrier i30s and timer. Can it work?

    Hi everyone, I 'think' I've found a cheap solution to fulfilling all of my family's heat automation needs using Terrier i30 TRVs (eTRVs that have a timer, but no way of calling the boiler for heat). However, it seems too good to be true. Therefore, I wondered if I could run it by some of you...
  2. J

    Zone valve - replacement head?

    Hi all, Does anyone know if you can replacement heads for this zone valve? And if so, can you replace the head only (without having to drain the heating pipes)? Thanks Jennie
  3. A

    Single Zone UFH Help in bathroom, so many questions

    Done a fair bit of reading and spoke to numerous plumbers/heating engineers and I get so many different answers to my question. By nature I'm a pretty inquisitive bloke and like to know how things work and if its the best way to do things. So my first question is does a single zone UFH setup...
  4. J

    UFH zones not heating up

    Hi, I'm a complete novice to UFH so excuse my ignorance! I've just had underfloor heating installed and an area of the ground floor is not heating up. The thermostat is set to 21 but it isn't getting past 20, and that's due to heat from other zones within a large open plan ground floor. The...
  5. D

    Single Zone UFH addition to main system wiring

    Advice needed please: I have an UFH installation as part of my main CH system. The UFH will never be required in isolation to HW or main CH, therefore keen to wire it completely independently of boiler and main wiring. All I want to achieve is the following: A new Room stat (in the location...
  6. D

    UFH zone always on - what is causing it?

    Hi There Currently using a Panasonic Air to Water UFH heating system in a new build and appear to have some gremlins in the system 1 - I've noticed that the kitchen zone is always hot if any other zone in the building is on. What could be causing this? Additional info - I think it is not...
  7. C

    Changing radiator to another zone

    Hi, I have a 2 Zones for my central heating. I have attached the picture of the Zones. I wanted to move the "hallway rad Zone 2" to Zone 1. From looking at the piping. I think I can just move the "hallway rad Zone 2" pipe (thin white one) to Zone 1 so it gets the hot water from Zone 1 when the...
  8. T

    Honeywell normally open zone valve

    Interesting question and one I’ve never even thought about until I messed up today. This might be a bit long…. I’ve got a multi fuel system on the go, gravity primary’s for hot water off Rayburn, big biomass boiler, air source is involved for the floors , pumped heating split into 5 zones blah...
  9. T

    Cause of intermittent noise from pump and zone valves

    Open vented fully pumped oil fired system. Works well but occasionally (every few days or do) loud throbbing noise from pipes directly above boiler. Goes away if system switched off and then immediately on again. New pump and no benefit from replacing zone valves. Any ideas gratefully received
  10. M

    Zone vales underfloor

    Has anyone seen this configuration before with zone valves installing under the floor in the joist area with an access trap. Not ideal I know. Is for zoning a downstairs drop system and upstairs 15mm up though the floor. Boiler in the kitchen with pipes exiting upwards from the boiler via stand...
  11. D

    Hive installation - dual zone heating with Combi boiler and hot water cylinder

    Hi all, At our old flat, we had a combi boiler which dealt with heating and hot water without an additional tank. There was an external timer next to the boiler, and a room thermostat (manual) in the hallway. I was able to replace the latter with a receiver and wireless (not smart) thermostat...
  12. H

    Advice on a JG UH3 Wiring Zone and how to stop the UF pump running when the HW timer kicks in

    Hi all. First post. I have a JG UH3 wiring zone and I've noticed that the UFH pump always comes on when the HW 'circuit/thermo' is triggered. Hence - rather than just heat the water in the tank - I also heat the UF circuits. I can't see a way to avoid this - it may be the way the circuits...
  13. F

    Honeywell 2 port zone valve not turning on

    There's power going to the valve head but the motor won't activate to turn the spindle to open the valve. The manual override will not activate the valve either. Should I replace the valve powered or Whole valve unit with pipe/spindle attached. My initial thinking the valve motor died and I...
  14. C

    Evohome multiple HR92 in single zone

    Hi I want to set multiple HR92 on a single zone on my Evohome system but the documation leaves a lot to be desired so I would appreciate some help. This is especially true as the information I have found relating to multiroom says that the Heating type should be set to "zone valve" rather than...
  15. D

    Replacing gas hob with existing cooker hood inside hot zone

    Hi, my gas hob needs replacing but I'm told first the existing cooker hood must be raised as it's 70cm instead of 75cm above gas hob as per new regulations. Is that right?
  16. K

    Dual Zone

    Hi, Looking for some advice please. I live in france. We have a house with an attached cottage. We have no heating in our house but the cottage has a combi boiler and central heating rads. Seeing as this cottage is rarely used in the winter it seems daft not to add some rads to the boiler for...
  17. C

    Zone valve query

    Hi I have 3 zone valves, one per floor. I am having an Evohome system fitted so that I can get better control over the room temperatures. The exisiting zone valves will no longer be required and so it would make sense for them to be removed and replaced by pipe. The main issue is that a...
  18. P

    heating zone valves

    Can I run a motorised zone valve and room thermostat from a 240V supply to control a single radiator when the heating is on? Meaning the valve will be open when the room is below the temperature set on room thermostat without turning the boiler on / valve will close shutting off flow to a...
  19. Scott_D

    Zone Valves

    What are the best zone valves in your opinion? I mostly fit honeywell but as prices creep up I am thinking are they any better than danfoss, drayton EPH?
  20. T

    Have added an underfloor zone to existing heating have issue with temperatures

    So I have just added an underfloor zone to a house extension. Boiler is Worcester Greenstar 30Cdi. has a Comfort II RF stat fitted that controls the radiator zone. I have added a zone valve to my new zone and used the 230V side of the control board to fire the boiler. the boiler fires fine but...
Back
Top