combustion

Gotta service an Ideal Classic in the nxt few days - never services one of these, anything I should pay particular attention to?

Hi, I'm after some advice regarding the above boiler. Personally I've never come across this model as I mainly work with commercial boilers. The problem I'm experiencing is when the boiler has been running for about 20 mins it will just go out and then re light with a bit of a pop. Im the 3rd...

Was reading some threads comparing Kane vs Anton and came across reference to the 'combustion curve'. Must have missed that day at college! Can anyone shed any light on this and point me in the direction of some reference material? Thanks in advance

Hi guys, i am in need of some guidance. I have just got a kane analyzer and have just used for the first time on an install the other day. I am wanting to know if these results are all ok? o2% 4.3 CO2% 9.4 CO PPM 107...

A belated merry Christmas. I wondered if any of you gas safe guys could provide some advice. I operate in area that is largely off the gas grid, so I do not do gas work, only oil. However there have been a couple of occasions when I have needed to access the pump to bleed it after installing...

hi everyone . which E.C.G.A is best value for money and were best place to get one

whats the c02 or combustion ratio for worchester 28i jounior that would be grate thanks:seeya:

hi got an alpha 240e boiler that keeps igniting and then instantly going out on both hot water and ch.this is an intermittent problem which does not help.if i remove the combustion chamber cover it ok and works every time.have checked pressure switch and fan starts up ok,can anybody help. simon

Any suggestions where to get the corgi publications; Gas rating slide rule (GRB1), Combustion performance testing (CPA1) and Using portable electronic combustion gas analysers (GID12). Can only seem to find em on Corgi direct and they seem a bit pricey!

on heat exchanger there is green scale build up and black markings on cover, would this be a split in heat exchanger causing a leak,and when doing combustion checks the mi asks for co% and ppm, my readings were no where near mi readings,but my ratio was well within limits,and trying to adjust...

Hi people, not sure if this is in the right section on the forum or not. I have come across a few Worcester Ri boilers recently on the housing association contract I work on. One I went to a few weeks ago had been switched off due to high CO by the service engineer. I adjusted the gas valve as...

Does anyone knoe how you are meant to get and analyser sprint v2 into the test point of the worcestre . I breifly looked at it today and when you take the combustion cap of at the top left of the boiler there is a hole about 4mm. Obviously the probe wont fit in . Is there an adaptor . Or am I...

For Sale £300 Kane 250 Gas combustion / Flue analyser. Mint condition, used once. Contact Katharine on 07876678733- cash on collection from Basingstoke or send chq + postage and I will post recorded Includes Carry Case Kane 250 analyser with Rubberised case with magnet Flue probe Heavy duty...

hi need some advice as getting bit confused. action point for combustion ratio for a combi not condensing is 0.008 what is the action point for a condensing boiler as have read 0.008 is I.D and 0.004 is A.R is the right???? many thanks

On the CORGI Landlord/Home Owner Gas Safety Record there is a box that says 'Combustion Analyser Reading'. Below that, many of the LGSCs I've seen have NA written in the box. Is there any requirement to use FGA on one? I also note in another thread that there is no requirement for using an FGA...

i recently attended a call out to a faulty water boiler, it had been isolated at the gas valve and warning signs posted but not capped off. is this illegal?

For Sale £330 Kane 250 Gas combustion / Flue analyser calibrated until 3/11/2011 in excellent condition, This package costs £450 on corgi web site. I am only selling as I have upgraded Contact Stuart on 07791905846 - cash on collection from Fleckney between Leicester and Market Harborough...

Hi, Could someone please advise what the likely cause is to the following. Boiler wouldn't start this morning so woke up cold. Tried to start, motor running, sounded as though it fired more loudly than normal, motor continued to run but flame extinguished. Thought it was a lack of oil and...